I have tried to register a couple of analogic phones on a UC500, they are plugged on the FXS ports but they always get busy line.
I have used the mac that appeared on the Configuration Assistant but I don't really know if the FXS mac for each port is the right one.
I have the following configuration and I can't find any error, I hope someone can help me out:
voice-port 0/0/0
cptone ES
timeouts ringing infinity
description EXT_6002
!
voice-port 0/0/1
cptone ES
timeouts ringing infinity
description EXT_1002
!
voice-port 0/0/2
cptone ES
timeouts ringing infinity
description EXT_6001
!
voice-port 0/0/3
cptone ES
timeouts ringing infinity
description EXT_3333
ephone-dn 5 dual-line
number 3333 no-reg primary
label 3333
description Disenadores Disenadores
name Disenadores Disenadores
call-forward noan 1999 timeout 17
huntstop channel
!
ephone-dn 6 dual-line
number 6002 no-reg primary
label 6002
description Desarrolladores B
name Desarrolladores B
call-forward noan 1999 timeout 17
huntstop channel
!
ephone-dn 33 dual-line
number 1002 no-reg primary
label 1002
description Inaki Aliaga
name Inaki Aliaga
call-forward noan 1999 timeout 17
huntstop channel
!
ephone-dn 34 dual-line
number 6001 no-reg primary
label 6001
description Desarrolladores A
name Desarrolladores A
call-forward noan 1999 timeout 17
huntstop channel
ephone 24
device-security-mode none
mac-address B8FA.EBB0.0000
max-calls-per-button 2
username "Disenadores" password 12345
type anl
button 1:5
!
!
!
ephone 25
device-security-mode none
mac-address B8FA.EBB0.0001
max-calls-per-button 2
username "DesarrolladoresB" password 12345
type anl
button 1:6
!
!
!
ephone 26
device-security-mode none
mac-address B8FA.EBB0.0002
max-calls-per-button 2
username "InakiAliaga" password 12345
type anl
button 1:33
!
!
!
ephone 27
device-security-mode none
mac-address B8FA.EBB0.0003
max-calls-per-button 2
username "DesarrolladoresA" password 12345
type anl
button 1:34
!
