Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Analogue Modems connected to Cisco equipment

I am currently spec'ing a Call Manager solution.

However, I can't find a definitive answer to determine if its possible to connect modems to analogue ports on a 3600, 4000 or 6000.

The customer currently has dedicated PSTN lines for this but would obviously like an intergrated solution.

Any ideas if/which cards will support this?

thanks

Mark.

3 REPLIES
New Member

Re: Analogue Modems connected to Cisco equipment

How many PSTN's have you got to hook up and are they for fax or data, if the later what speeds are they currently running at?

New Member

Re: Analogue Modems connected to Cisco equipment

They have approx 3-4 fax and modems at each location (8 offices). The modems are various types running at V34 or V90.

Cisco Employee

Re: Analogue Modems connected to Cisco equipment

Using the latest loads for the WS-X6624-FXS blades (A002U300) and the WS-X6608-[T1|E1] blades (D004U300) fax as well as modem has been working pretty well, and at good speeds.

109
Views
0
Helpful
3
Replies
СоздатьДля создания публикации, пожалуйста в систему