Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Any command to check how many channels in 6608?

I have 6608 module in the 6509 box and enabled 10EA channel in the T1 port. Is there any way to check how many channels are active currently? I'm looking a command similar to the "show isdn service" in the IOS router.

Thanks in advance,

3 REPLIES

Re: Any command to check how many channels in 6608?

You can use the "show port voice active" command. Take a look at the following link.

http://www.cisco.com/en/US/products/hw/switches/ps708/products_command_reference_chapter09186a00802deca3.html#wp1126384

Hope this helps. If so, please rate the post.

Brandon

Re: Any command to check how many channels in 6608?

Or you can use performance monitor (real time monitor) to view how many T1 channels are active.

HTH

Sankar

PS: plesae remember to rate posts!

Silver

Re: Any command to check how many channels in 6608?

You can also see this via the 6608 web interface.

To access the web interface, go to

Callmanager Admin > Device > Gateway > Find the gateway and Click on the IP Address of the gateway.

This will bring the web interface. Click on the "Port Status" link and this will show the status of each channel.

Regards,

Anup

105
Views
0
Helpful
3
Replies
CreatePlease login to create content