Anyone ever experience ICT calls failing after 3min 7sec?
Hit post too soon...
We've got 3 CM sites, Site-A & B are running Call Mgr 3.2(2c)es77.2 and Site-C is running 3.1(3a).
- Site-A can initiate a 4-digit call to either sites, B or C
- Site B & C can initiate a 4-digit call to each other
- If site B or C initiates a 4-digit call to site-A, the call drops after 3min 7sec. The called party (from site-a) gets fastbusy, while the calling party (site b or c) thinks the call is still connected.
Was going to open a TAC case, however, things are getting progressively worse and may back out the patch.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...