CUrrently our phone registered on publihser as primary. we'll change the ccm order in the ccm group. However my question here is if we upgrade the publihser patch, will the active call drop? We have sub in the cluster too.
Not sure what you mean by a patch, but if i understand correctly you are asking if active calls will be dropped when re-ordering the order of CCMs in CCM group, right? No, all active calls will stay up, since the RTP connection is between the phone and another phone or GW, after you hang up the call the phone will register with the primary callprocessing server.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...