If you are interested in understanding the voice quaility in your netowrk then you can use the ART QoS reports. If you are interested in the health of the CalManager server itself then you will probably want to start by looking at the Application Event log for messages/errors gnerated by CallManager.
You can also use Performance Monitor to many areas in CallManager. There are many CallManager related counters. For example, you can monitor Transcoder resources for total available, currently active and failed resource requests.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...