as 5300 connectionid

[zweiqian]

i have configured as5300 for runnning voice and when i show log ,i didn't know what means connectionid,for examble 'connectionId 64323334 64353339 30366238 63383431'.how i analyse it ,help much appreciated.

[ciscomoderator]

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.

[litrenta]

the numbers are the global call identifier for the call (the gateway assigns this dynamically) see:

http://www.cisco.com/univercd/cc/td/doc/product/access/multicon/3810soft/cmdref/execref.htm#xtocid33278

for an explanation of all the fields.

[zweiqian]

thank you very much, connectionid that the gateway assign this dynamically,but if the same voice-gateway(not cisco) direct to the same as5300( ip address) in different time,it can generate different connectionid,how all of coonectionid corelate?I think it must be, i want to know the principle of connectionid that as5300 generate. and may i use them to identify different voice-gateway?

and my vioce-gateway can handshake with as5300 by gatekeeper,it can send its MAC address to as5300,pls tell me how i configurate as5300, then as5300 will log voice-gateway MAC address?

any help is appreciated.

[duc-vu]

Mr Zweigian,

Do you have a working config for this As5300 ? is it used for long-distance toll bypass ? please send me a copy of your config. Thank you very much.

Duc Vu

dvu5103@yahoo.com