Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

AS 5300 error (unassigned number (1))

Hi All,

I have facing problem on calls having this error (unassigned number (1)) this greatly affect my ASR. May i know what cause this,?? how can i solve this problem??

Thank regards

Chan

  • Other Collaboration Voice and Video Subjects
5 REPLIES
New Member

Re: AS 5300 error (unassigned number (1))

it means the Called party/Dialled number does not map to anything. Make sure you are not inadvertently stripping digits or have translation rules. If you are using Call Manager make sure that you have an extension that maps to the Called Number.

New Member

Re: AS 5300 error (unassigned number (1))

But have 4 dial-peer for 4 ports

Call coming in is 17711XXXXXXXXXX still having the problem..any advise?

Like

dial-peer voice 17 pots

destination-pattern 1711T

progress_ind alert enable 8

direct-inward-dial

port 0:D

prefix 0

!

dial-peer voice 18 pots

destination-pattern 1711T

progress_ind alert enable 8

direct-inward-dial

port 1:D

prefix 0

!

dial-peer voice 19 pots

destination-pattern 1711T

progress_ind alert enable 8

direct-inward-dial

port 2:D

prefix 0

!

dial-peer voice 20 pots

destination-pattern 1711T

progress_ind alert enable 8

direct-inward-dial

port 3:D

prefix 0

!

New Member

Re: AS 5300 error (unassigned number (1))

It all depends on you dialplan. What digits do you want to send out?

At the moment you are sending out the following digit string...

User dials 17711ABCDEFGHIJ

17711 is stripped and prefix of 0 is added. So

0ABCDEFGHIJ will be sent out. Is this what you intend?

New Member

Re: AS 5300 error (unassigned number (1))

yes 17711 will be strip..all the other will send to switch...

New Member

Re: AS 5300 error (unassigned number (1))

the number you are sending is not being recognised at the terminating switch. This is producing the Release with cause Unallocated/Unassigned number.

294
Views
0
Helpful
5
Replies
This widget could not be displayed.