AS 5300 error (unassigned number (1))

bigchan · ‎11-12-2003

Hi All,

I have facing problem on calls having this error (unassigned number (1)) this greatly affect my ASR. May i know what cause this,?? how can i solve this problem??

Thank regards

Chan

vmalhi · ‎11-12-2003

it means the Called party/Dialled number does not map to anything. Make sure you are not inadvertently stripping digits or have translation rules. If you are using Call Manager make sure that you have an extension that maps to the Called Number.

bigchan · ‎11-12-2003

But have 4 dial-peer for 4 ports

Call coming in is 17711XXXXXXXXXX still having the problem..any advise?

Like

dial-peer voice 17 pots

destination-pattern 1711T

progress_ind alert enable 8

direct-inward-dial

port 0:D

prefix 0

!

dial-peer voice 18 pots

destination-pattern 1711T

progress_ind alert enable 8

direct-inward-dial

port 1:D

prefix 0

!

dial-peer voice 19 pots

destination-pattern 1711T

progress_ind alert enable 8

direct-inward-dial

port 2:D

prefix 0

!

dial-peer voice 20 pots

destination-pattern 1711T

progress_ind alert enable 8

direct-inward-dial

port 3:D

prefix 0

!

vmalhi · ‎11-12-2003

It all depends on you dialplan. What digits do you want to send out?

At the moment you are sending out the following digit string...

User dials 17711ABCDEFGHIJ

17711 is stripped and prefix of 0 is added. So

0ABCDEFGHIJ will be sent out. Is this what you intend?

bigchan · ‎11-12-2003

yes 17711 will be strip..all the other will send to switch...

vmalhi · ‎11-12-2003

the number you are sending is not being recognised at the terminating switch. This is producing the Release with cause Unallocated/Unassigned number.