Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

As5300 4 E1s cannot use more than 60 ports

Dear All,

we have an AS5300 with 4 E1, with IOs 12.2(XA). But we could not use more than 58 ports of it. Someone know if there is a kind of limit of use in this equip.

Thanks

Samy

2 REPLIES
Cisco Employee

Re: As5300 4 E1s cannot use more than 60 ports

Samy

You are probably limited by vfc, How many VFC's do you have ? and how many DSP' are on each vfc ?

do

show vfc 1 board

show vfc 2 board

you need 30 dsp's on each board to do 120 calls thats with C549 technology do

show vfc 1 tech

show vfc 2 tech

and determine codec complexity you are using.

Check out this link for an explanation:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120xh/pucc124x.htm

New Member

Re: As5300 4 E1s cannot use more than 60 ports

Dear Sir,

As you asked had 30 dsp in each VFC as show:

BR_1X2_01#sh vfc 1 board

VFC board state is UP, vfc status VCWARE running(0x4)

VFC board in slot 1 with 30 dsps

BR_1X2_01#sh vfc 2 board

VFC board state is UP, vfc status VCWARE running(0x4)

VFC board in slot 2 with 30 dsps

BR_1X2_01#show vfc 1 tech

Technology in VFC slot 1 is C549

BR_1X2_01#show vfc 2 tech

Technology in VFC slot 2 is C549

and the codec That Iam using is:

voice class codec 1

codec preference 1 g723r63

codec preference 2 g729r8

codec preference 3 g711ulaw

codec preference 4 g711alaw

BR_1X2_01#sh vfc 1 cap

Capability List for VFC in slot 1 and 2 use:

1. cor-vfc-hc-l.3.4.27l.bin

2. bas-vfc-hc-l.3.4.27l.bin

3. fax-vfc-hc-l.3.4.27l.bin

4. cdc-g711-hc-l.3.4.27l.bin

5. cdc-g726-hc-l.3.4.27l.bin

6. cdc-g729-hc-l.3.4.27l.bin

7. cdc-g728-hc-l.3.4.27l.bin

8. cdc-g723.1-hc-l.3.4.27l.bin

I do not see anything wrong... Could be the gAtekeeper ? Iam using a cisco 7200 with IOS:

Cisco Internetwork Operating System Software

IOS (tm) 7200 Software (C7200-JS-M), Version 12.2(2)XA, EARLY DEPLOYMENT RELEASE

SOFTWARE (fc1)

TAC:Home:SW:IOS:Specials for info

Copyright (c) 1986-2001 by cisco Systems, Inc.

Compiled Tue 26-Jun-01 23:17 by hwcheng

Image text-base: 0x600089C0, data-base: 0x61892000

ROM: System Bootstrap, Version 11.1(13)CA, EARLY DEPLOYMENT RELEASE SOFTWARE (fc

1)

BOOTFLASH: 7200 Software (C7200-BOOT-M), Version 11.1(16)CA, EARLY DEPLOYMENT RE

LEASE SOFTWARE (fc1)

BR_GK uptime is 4 weeks, 4 days, 6 hours, 52 minutes

System returned to ROM by reload at 12:00:32 UTC Thu Aug 29 2002

System restarted at 12:03:09 UTC Thu Aug 29 2002

System image file is "slot0:bootflash"

cisco 7206 (NPE200) processor (revision B) with 114688K/16384K bytes of memory.

Processor board ID 11058156

R5000 CPU at 200Mhz, Implementation 35, Rev 2.1, 512KB L2 Cache

6 slot midplane, Version 1.3

Last reset from power-on

Bridging software.

X.25 software, Version 3.0.0.

SuperLAT software (copyright 1990 by Meridian Technology Corp).

TN3270 Emulation software.

8 Ethernet/IEEE 802.3 interface(s)

2 FastEthernet/IEEE 802.3 interface(s)

8 Serial network interface(s)

125K bytes of non-volatile configuration memory.

4096K bytes of packet SRAM memory.

16384K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).

4096K bytes of Flash internal SIMM (Sector size 256K).

I really do not know what could be "blocking" the perfomance of it.

Thanks

Samy

83
Views
0
Helpful
2
Replies
CreatePlease to create content