Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

AS5350 for VoIP - Do I need to install Universal Port Feature Card?

I am confused if I need to install a Universal Port Feature Card to the AS5350 if I am going to used it exclusively for VoIP? I am planning to connect the 5350 to a pbx via 4E1 interface. I've read that the Universal card can terminate voice, data, and fax calls. How does it work? I mean, if the voice call is bound to the pstn thru the pbx, I don't think the universal port needs to terminate the voice call. Can somebody help me on this one? Or if you could give me a link for cisco web site. Thanks in advance.

2 REPLIES
Bronze

Re: AS5350 for VoIP - Do I need to install Universal Port Featur

Take a look through the Reference Network Design Guides at http://www.cisco.com/warp/public/779/largeent/netpro/avvid/iptel_register.html and here's a data sheet that might help too: http://www.cisco.com/warp/public/cc/pd/as/as5350/prodlit/as53_ds.htm

New Member

Re: AS5350 for VoIP - Do I need to install Universal Port Featur

Thanks for the help. I've already figured it out. The Universal Port Cards worked the same way as the DSP's in the T1/E1 High Density Netmod for Cisco Routers to convert voice calls into a form that can be transmitted over the IP network and vice versa. I need to include the module in my design. Cheers!

89
Views
0
Helpful
2
Replies
CreatePlease login to create content