Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

AS5350 recovery on time expiry

My AS5350 gateway looses VoIP calls due to "recovery on time expiry" on the

E1R2 CAS link. following is the call log;

GENERIC:

SetupTime=262305290 ms

Index=10062

PeerAddress=11111#94777779909

PeerSubAddress=

PeerId=3002

PeerIfIndex=279

LogicalIfIndex=150

DisconnectCause=66

DisconnectText=recovery on timer expiry (102)

ConnectTime=0

DisconnectTime=26230890

CallDuration=00:00:00

CallOrigin=1

ReleaseSource=2

ChargedUnits=0

InfoType=speech

TransmitPackets=0

TransmitBytes=0

ReceivePackets=0

ReceiveBytes=0

TELE:

ConnectionId=[0x281D0BE0 0xA49511D7 0xB6ACD4C6 0xD0C13EB8]

IncomingConnectionId=[0x281D0BE0 0xA49511D7 0xB6ACD4C6 0xD0C13EB8]

TxDuration=0 ms

VoiceTxDuration=0 ms

FaxTxDuration=0 ms

CoderTypeRate=None

NoiseLevel=0

ACOMLevel=0

SessionTarget=

ImgPages=0

CallerName=

CallerIDBlocked=False

OriginalCallingNumber=601234567

OriginalCallingOctet=0x1

OriginalCalledNumber=1111#94777779909

OriginalCalledOctet=0x81

OriginalRedirectCalledNumber=

OriginalRedirectCalledOctet=0x7F

TranslatedCallingNumber=601234567

TranslatedCallingOctet=0x1

TranslatedCalledNumber=1111#94777779909

TranslatedCalledOctet=0x81

TranslatedRedirectCalledNumber=

TranslatedRedirectCalledOctet=0xFF

GwReceivedCalledNumber=1111#94777779909

GwReceivedCalledOctet3=0x81

GwOutpulsedCalledNumber=0732829

GwOutpulsedCalledOctet3=0x81

GwReceivedCallingNumber=601234567

GwReceivedCallingOctet3=0x1

GwReceivedCallingOctet3a=0x80

GwOutpulsedCallingNumber=601234567

GwOutpulsedCallingOctet3=0x1

GwOutpulsedCallingOctet3a=0x80

What is the timer value to be changed to overcome this problem ?

3 REPLIES
New Member

Re: AS5350 recovery on time expiry

When qsig sends a connect, it expects ack back and if it does not get it then the t310 expires and tears down the connection. You can however change the t310 timer in the router under the d channel as shown in this link.

http://www.cisco.com/en/US/partner/tech/tk652/tk701/technologies_tech_note09186a0080094487.shtml

New Member

Re: AS5350 recovery on time expiry

I have only E1R2 CAS connection. What is the solution for this kind of link ?

New Member

Re: AS5350 recovery on time expiry

hello,

you have to check the other end of the voip channel , if the other end is using PRI signaling so u should increment t310 timer at the other end to 60000ms.

Hope this helps

Jacob.

287
Views
0
Helpful
3
Replies