Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

ATA 186 + GK + CCM + CCM2

we have installed new ATAs in remote offices and we use a GK to control different zones, ATa are working with h323 load and configured in GK, ATas are registered, we also use ICT GK controlled to connect our CCMs, is it possible to make a call from ATA to IP Phones? Already we dont get Dialtone.

Please help!!!!

1 ACCEPTED SOLUTION

Accepted Solutions
Green

Re: ATA 186 + GK + CCM + CCM2

Hi,

Yes, that is possible. A default configuration for local zone does not allow the H.323 terminals to put calls through directly to the destination. All terminals need to place calls through an H.323 proxy. As the Cisco ATA 186 is a terminal, it does not place a call to the default gatekeeper configuration.

http://www.cisco.com/warp/public/788/voip/ata186_no_call_gk.html

HTH

Gonzalo

2 REPLIES
Green

Re: ATA 186 + GK + CCM + CCM2

Hi,

Yes, that is possible. A default configuration for local zone does not allow the H.323 terminals to put calls through directly to the destination. All terminals need to place calls through an H.323 proxy. As the Cisco ATA 186 is a terminal, it does not place a call to the default gatekeeper configuration.

http://www.cisco.com/warp/public/788/voip/ata186_no_call_gk.html

HTH

Gonzalo

New Member

Re: ATA 186 + GK + CCM + CCM2

Thanks

115
Views
0
Helpful
2
Replies
CreatePlease to create content