Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ata 186 password

anyone knows the default passord for ata 186?

thanks

3 REPLIES

Re: ata 186 password

Which password? If for the UI, there is no default. If a password has been set and you don't have access to it, you will have to perform a factory reset on the ATA. See the Recover Forgotten Password section of the following link.

http://www.cisco.com/en/US/products/hw/gatecont/ps514/products_configuration_example09186a00800c3a50.shtml#task8

Hope this helps.

Brandon

New Member

Re: ata 186 password

-done the following..the phone ivr was working..but factory reset just not working..

- after putting the factory reset, it still ask for the password...

----------------------------------

Unplug the Ethernet cable.

Pick up the telephone handset.

Press the Function button on top of the ATA.

Enter 322873738#*

New Member

Re: ata 186 password

maybe my problem was this...opflags maybe were set to 6...now how to go thru this...

see table 5-6

http://www.cisco.com/en/US/docs/voice_ip_comm/cata/186_188/2_15/english/administration/guide/h323/h3288APE.html#wp1021320

To configure the Cisco ATA to prompt the user for the UIPassword when the user attempts to perform a factory reset or upgrade using the voice configuration menu, configure bits 28 to 31 with the value of 6. Any other value for these bits means that the Cisco ATA will not prompt the user for the UIPassword in these cases.

400
Views
0
Helpful
3
Replies