ATA 186 Reproducing DTMF tones from RFC2833 events

[kevin_noll]

I am trying to get my ATA 186 (running version SCCP 3.x under CCM 5.04a) to reproduce received rtp-events. This is supporting a third-party IVR system that is connected via analog ports.

The IOS gateway that is sending the events is configured for dtmf-relay rtp-nte, and I can see the RTP events being received at the ATA. However, all I hear at the ATA is nothing or clicks.

I have the audiomode setting on the ATA set to 0x00150015 as is recommended in the ATA administrators guide.

Does anyone have DTMF working through the ATA?

[Sascha Monteiro]

Hi Kevin,

have you debugged the ATA with prserv.exe?

I had some issues in the past with a PESQ tester, and setting the audiomode to 0x00120012 helped for me.

hth

Sascha

....this is the output from prserv on a good call

|->CallState[0]=4 L=1 R=4016c6c FG=0 r=0,0

FG NewState[0]=4, L=1, R=4016c6c

|->CallInfo[0]

|->SetRingerMode[0]:3

<-|StOffHk[0]

|->SetRingerMode[0]:1

|->CallState[0]=1 L=1 R=4016c6c FG=0 r=4016c6c,0

|->SetRingerMode[0]:1

[0]StopTone

|->CallState[0]=5 L=1 R=4016c6c FG=0 r=4016c6c,0

|->CallInfo[0]

[0]StopTone

|->OpenRxChn[0]

[0]StopTone

<-|OpenRxChnAck[0]

Save Media[0]

|->StartMediaTx[0]:pt=0 ps=20 ss=0 ip=a63801f:19422

[0]MPT mode 0

[2]MPT mode 0

Enable LEC adapt [0]=1

[0]Enable encoder 0

[0]DPKT 1st: 3680 3520, pt 0

15948:00;2,0,0,0,

[0]DTMF 1 , insum:323505

[0]StopTone

[0]DTMF 2 , insum:285988

[0]DTMF 3 , insum:289227

[0]DTMF 4 , insum:287021

[0]DTMF 5 , insum:284108

[0]DTMF 6 , insum:286979

[0]DTMF 7 , insum:284993

[0]DTMF 8 , insum:302792

[0]DTMF 9 , insum:293475

[0]DTMF 0 , insum:293768

[0]DTMF * , insum:279360

[0]DTMF # , insum:301230

<-|EndCall[0]

<-|SK[0]:9, L=1, FGR=4016c6c

[0]StopTone

->CloseRxChn[0]

|->StopMediaTx[0]

|->CallState[0]=2 L=1 R=4016c6c FG=0 r=4016c6c,0

IDLE[0]

|->SetRingerMode[0]:1

15948:30;2,0,0,0,