Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

ATA 186 (SIP coverted to SCCP) will not register to CM

I have a situation where SIP ATA's were ordered instead of SCCP. I downloaded and upgraded the ATA's with Version 3.2.3 software for SCCP. The ATA's pull ther configuration form the callmanager tftp server, but they will not register with callmanager. Anyone have any ideas that might help?

Thanks

3 REPLIES

Re: ATA 186 (SIP coverted to SCCP) will not register to CM

you can browse to the ATA, in 3.2.3 just to the ip-address

http://ata-ip-address/

Also, can you see errors in the CCM traces where the ATA tries to register to?

Is your environment using DNS, or do you have ip-addresses for CallManager server config?

New Member

Re: ATA 186 (SIP coverted to SCCP) will not register to CM

you can access the ATA 186 using

http://IP-address/dev

New Member

Re: ATA 186 (SIP coverted to SCCP) will not register to CM

Assuming that IP connectivity isn't an issue, Look at the configuration through the web, make sure that the CCM settings are in the page. If they aren't then make sure the SCCP settings have a '.' for the SID0, SID1 and that the TFTP has a 1.

Also make sure the '150' option is defined in your DHCP server

745
Views
0
Helpful
3
Replies
CreatePlease to create content