Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

ATA 188 static VLAN

Hi

I am running an ATA 188 (2.15ms) behind a non-Cisco switch with 802.1Q VLAN trunking. The VLAN ID that the ATA should use is 0xFF, I have configured the OpFlags field (0x30) and the VLANSettings field (0x03fc002b) but it does not work. Do I need to configure something more? Is my configuration correct?

Gerwin

1 REPLY
Bronze

Re: ATA 188 static VLAN

The following link has the info on the VLAN configuration on Cisco ATA.

CDP and VLAN Configuration on Cisco ATA

http://www.cisco.com/en/US/products/hw/gatecont/ps514/products_administration_guide_chapter09186a00800c4d19.html#75190

For futher reference:

Cisco ATA 186 Basic Configuration

http://www.cisco.com/warp/public/788/voip/ata_basicconfig.html

Hope this helps.

123
Views
0
Helpful
1
Replies