ATAs are very easy to configure, basically like a phone. The ports will appear as phones in CCM. I have heard of mixed results with fax machines. However, we have been using ATAs with fax for a number of years. You'll just want to be sure that your voice circuit is clean - no slips, errors, that you're not trying to send fax across the WAN using something other than g.711 and that your fax machines are not trying to send at high speeds. I've had good success limiting speeds to 9600 or 14400.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...