Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

ATA G729 Codec Limitations

hello

i have a question about ata 186, why it is limited to one call in G729, it is due to hardware or software ?

Thanks

2 REPLIES

Re: ATA G729 Codec Limitations

hi

hope this link helps..

http://www.cisco.com/warp/public/788/voip/ata-faq.shtml

ATA 186 does not support two ports using G.729a codec simultaneously. The G.729 codec can only run on one port at a time. When one port uses G.729, other port will use G.711. The following combinations are allowed on the ATA 186:

Two simultaneous G.723.1 codecs

Two simultaneous G.711 codecs

One G.723.1 and one G.711 codec

One G.729A and one G.711 codec (G.729A is available on first-come, first-served basis)

regds

New Member

Re: ATA G729 Codec Limitations

Thanks a lot for the info

283
Views
0
Helpful
2
Replies