Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ATA reboot

I have the cisco call manager version 6 and the ATA reboot once a week. Why is this happening?

4 REPLIES
Silver

Re: ATA reboot

Hi,

Can you tell me what firmware the ATA is using?

There is possibly a problem in firmware prior to version 3.

There is also a known bug which may be relevant?:

CSCso94320 Bug Details

TFTP procedure causes ATA reboot

Symptom:

ATA does an unexpected reboot, and see infinite tftp request at preserv log

Conditions:

ATA enables both channel, but CCM disables auto register and only config one channel.

Workaround:

Disable the second channel to stop infinite tftp request

Is there any more information in the CCM trace files (get them from RTMT - Real-Time Monitoring Tool)

Please rate useful posts...

New Member

Re: ATA reboot

how to disable second FXS on ATA

Hall of Fame Super Red

Re: ATA reboot

Hi Somsak,

Here is the process;

Note By default, both Cisco ATA FXS ports are enabled for Cisco CallManager registration. If you do not want to add the Phone 2 FXS port to Cisco CallManager, you must change the Cisco ATA EPID1orSID1 parameter value to 0 to disable the Phone 2 port. (To disable the Phone 1 port, you must change the EPID0orSID0 parameter value to 0.)

http://www.cisco.com/en/US/docs/voice_ip_comm/cata/186_188/2_15_ms/english/administration/guide/sccp/sccpach4.html#wpxref70796

http://www.cisco.com/en/US/docs/voice_ip_comm/cata/186_188/2_15_ms/english/administration/guide/sccp/sccpaape.html#wp1020682

http://www.cisco.com/en/US/docs/voice_ip_comm/cata/186_188/2_15_ms/english/administration/guide/sccp/sccpaape.html#wpxref65796

Hope this helps!

Rob

New Member

Re: ATA reboot

hi Rob

thank you so much

138
Views
10
Helpful
4
Replies