Re: attendant console and multiple calls on cisco phone
Yes, but beware. If you use the legacy AC style of hunt group you will have problems. The features of the AC hunt groups that allow you to use AC usernames and line #s as hunt group members are stranded in the old model. Thus, you cannot have AC usernames and line #s in the new LG/HL model which support the busy trigger setting but the old model ignores this. So the answer to your question is yes, but watch your step if you are used to doing certain things. Pls rate if helpful.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...