Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Attendant console grabs focus on incoming call

I have a user who uses AC to provide busy/free status of lines on their 4.2.3 box. They don't use call control. AC has recently started grabbing focus on incoming calls which is annoying for the user as they are working in other programs when this happens. The user and their IT department claim that nothing has been changed on the PC, and we have made no changes on this user's CM profile. Any thoughts as to what may have changed/how to change it back?

Our last choice would be some software to force the open window to stay on top but since this was what was happening before, there should be some way of returning to that.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: Attendant console grabs focus on incoming call

Hi Joe,

You can use this method to enable / disable "Pop to Top"

Note: To toggle the pop-to-top feature on and off, press Alt + P.

From this doc;

http://www.cisco.com/en/US/products/ps7282/products_user_guide_chapter09186a00806cfff5.html#wp1007405

Hope this helps!

Rob

3 REPLIES
Hall of Fame Super Red

Re: Attendant console grabs focus on incoming call

Hi Joe,

You can use this method to enable / disable "Pop to Top"

Note: To toggle the pop-to-top feature on and off, press Alt + P.

From this doc;

http://www.cisco.com/en/US/products/ps7282/products_user_guide_chapter09186a00806cfff5.html#wp1007405

Hope this helps!

Rob

New Member

Re: Attendant console grabs focus on incoming call

Hmm looks like I should have RTFM. Thanks for that, I'd looked but hadn't seen it. That should do the trick.

Hall of Fame Super Red

Re: Attendant console grabs focus on incoming call

Hi Joe,

I wouldn't feel too bad here :) I always find that the most pertinant facts are almost always the hardest to find with this documentation! This is why I find these forums so helpful. Usually, someone else has encountered the unexpected and unexplained.

Take care and thanks,

Rob

217
Views
0
Helpful
3
Replies