Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Auto Answer with CME

Hi,

does anyone know how to make a CME extension auto answer? I have to still be able to call out from that extension, so it cannot be an intercom dn.

Thanks,

Dragi

1 REPLY
Bronze

Re: Auto Answer with CME

The interactive voice response (IVR) auto-attendant mechanism can support the handling of inbound calls on Foreign Exchange Office (FXO) ports and outbound calls on Foreign Exchange Station (FXS) ports, including analog phones configured through the POTS and Cisco IP phones configured through ephone-dn virtual FXS ports. "

ISDN/PRI means PRI. I agree it is not clear, but BRI is not supported.

These URLs should help you:

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/3_2/install/index.htm

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/3_1/install/index.htm

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122limit/122z/122zj15/itsv30/its30atd.htm#2174797

470
Views
0
Helpful
1
Replies
CreatePlease to create content