03-17-2009 08:58 AM - edited 03-13-2019 06:10 PM
Gentlemen,
Does CUCM 6.x have the following telephone features:
1) Auto Redial towards to internal (DN) number
2) Auto Redial towards to external (through Route Pattern) number
Thank you.
Solved! Go to Solution.
03-17-2009 09:29 AM
Basic Call for QSIG
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/5_0_1/ccmsys/a08procl.html#wp1140012
HTH
java
if this helps, please rate
03-17-2009 09:08 AM
1) yes, callback feature
2) yes. same as above but only over QSIG links
HTH
java
if this helps, please rate
03-17-2009 09:23 AM
Jaime,
Thank you much.
Can you, please, point me to the document that details the configuration of your 2nd answer.
03-17-2009 09:29 AM
Basic Call for QSIG
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/5_0_1/ccmsys/a08procl.html#wp1140012
HTH
java
if this helps, please rate
04-06-2009 07:09 AM
Hi Jaime,
Ok but how I can do the "Auto Redial" with the callback feature?
As I know callback feature is a notification message of the end user is available at this moment, but not "Auto Redial" automaticaly, how I can do this?
Thanks!
Francisco.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: