Avaya H.323 IP Trunk to Cisco CallManager

[rkeblusek]

Does anyone have a technical note on the setup and requirements for IP trunking an Avaya Definity with Ethernet to CallManager? Also, will this work with CallManager 3.3 and Q.Sig?

[smahbub]

The following URL has the tech note for integrating Cisco 3600 T1PRI with Lucent definity

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/cis3600/sw_conf/pbx_int/36ldt1pr.pdf

and the integration of Cisco 3600 Voice gateway with CM is explained in the following URL

http://www.cisco.com/en/US/products/sw/iosswrel/ps1839/products_feature_guide09186a00800b65dd.html

[rkeblusek]

These explain the PRI/T1 tie line trunking which we have done several times now for other customers. I am looking more specifically at an IP H.323 trunk not a PRI integration for this customer. I understand Avaya has tested and documented this so I am also trying that angle to get Avaya testing information to make this work.

[voipse]

You can locate Avaya integration notes here:

http://www1.avaya.com/enterprise/resourcelibrary/applicationnotes/index.html

[behrecri]

hi,

sure this help!

http://www1.avaya.com/enterprise/whitepapers/ip600cm2924.pdf

regards

chris