Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Basic CCME config over WAN

I am trying to setup basic CCME/SRST between two sites with Cisco IP Phones. Do you have simple sample config to follow? Any help would be good....

1 REPLY
New Member

Re: Basic CCME config over WAN

Check that link first please:

http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration_guide_chapter09186a00806a7fe8.html

Sample config of CME&SRST from CCO:

The following example shows a Cisco Unified CME system at 10.1.68.78 that is being used to provide SRST fallback services for 30 ephones.

telephony-service

srst mode auto-provision all

srst ephone template 5

srst ephone description srst fallback auto-provision phone

srst dn template 8

srst dn line-mode dual

max-ephones 30

max-dn 60

ip source-address 10.1.68.78 port 2000

max-redirect 20

system message ''SRST Mode: Cisco Unified CME'

keepalive 10

max-conferences 8 gain -6

moh welcome.au

create cnf-files version-stamp Jan 01 2002 00:00:00

!

ephone-dn 1 dual-line

number 7001

label 7001

description 7001

name 7001

ephone-dn-template 5

This DN is learned from srst fallback ephones

!

!

ephone-dn 2 dual-line

number 4005

description 4005

name 4005

ephone-dn-template 5

This DN is learned from srst fallback ephones

!

!

ephone-dn 3 dual-line

number 4002

label 4002

description 4002

name 4002

ephone-dn-template 5

This DN is learned from srst fallback ephones

!

!

ephone 1

description srst fallback auto-provision phone

ephone-template 5

mac-address 100A.7052.2AAE

button 1:1 2:2

!

!

ephone 2

description srst fallback auto-provision phone

ephone-template 5

mac-address 1002.CD64.A24A

type 7960

button 1:3

272
Views
0
Helpful
1
Replies