Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

BAT

Hello ,

I need to update about 600 devices and 800 profiles with the parameters in the end of this message and

i was not able to find it in the bat as an update option. i do find the option to set the parameters value using the bat for new devices /profiles only -which is not helping me..

I would appreciate to get some direction .

The parameters are :

In the device configuration (7960) i need to set all the phone in the system to have the first speed dial set to a specific number +name

in the device profiles :

i need to set a message (same message for all DP) in the field line text label for the first line.

Thanks in advance.

Tal Z

1 REPLY
Cisco Employee

Re: BAT

Tal,

You could use BAT to export the phones, edit the bat csv file with the appropriate info then re-import the phones. Do all phonesget the same speed dial? Same test for the line text label? If yes to both, please send the specifics to me at crieman@cisco.com and I will see what I can come up with. Let me know if you have any questions.

Regards,

Chester

92
Views
0
Helpful
1
Replies
CreatePlease to create content