just upgraded to cucm 6.1.2, and want to use the new BLF Pickup option. Problem is that when i do a AXL getPhone request, it doesn't show if the BLF Pickup option is set. The real problem is that when i take this info and post it back to the server in a updatePhone request, it clears the option if it has been set.
I'm setting "CUCM:DV ver=6.1" in the request. Is there the ability to set 6.1(2) and have that info, or is it just not implemented in AXL yet.
Are you getting or setting the BLF speeddial Pickup option that is new to 6.1.2?
You are right about it not clearing if you leave the tag out all together, but my purpose is to update a BLF and if you have any part of the tag, it replaces all of the blfs with what ever you send. Becuase of this, if i have the BLF pickup option set and update that BLF with AXL, the option is cleared because i don't see a way to send the the pickup option in AXL.
If you (or anyone) is setting or getting this option through AXL, what is the tag?
I'm doing both.. I load a phone which has a pickup blf, and create a one one with the same pickup blf.
And the tags I write basically look like this:
Or are you refering to the BLFs proper? those have been around since ccm5 and I have an application that allows people to update their speeddials and blfs from the phone.. and taht updates both device profiles (we use em) and phones concurrently and it works like a charm. You don't even need to specify a schema for speeddials (tag name speeddials) and blfs (tag name busyLampFields).
right - BusyLampFields, not blfDirectedCallParks. In the CUCM 6.1.2 they have added the feature that you can Pick a call the comes into an extension that you have as a BLF. This new feature is called BLF Pickup and is a checkbox on screen where you create the BLFs. Unless you are running the newest version of CM (6.1.2) you are not using this feature.
We have a similar application that was working just fine, and still works. The issue is not getting AXL or this object to work. The issue is finding out if AXL has been extended to include this new feature.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...