Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

Block Outgoing Calls SRST Mode

How can I Block Outgoing Calls in SRST mode. I want to block calls begins with the area codes 900,976,876....

My config for the dial-peers as follows,

dial-peer voice 101 pots

destination pattern 9T

port 1/0/0

!

dial-peer voice 101 pots

destination pattern 9T

port 1/0/1

!

5 REPLIES
New Member

Re: Block Outgoing Calls SRST Mode

New Member

Re: Block Outgoing Calls SRST Mode

will this config work in SRST....

voice translation-rule 10

rule 1 reject /^91800976*/

rule 2 reject /^91976*/

rule 3 reject /^91900*/

rule 4 reject /^9011*/

rule 5 reject /^91809*/

reject /^918887000400*/

rule 7 reject /^918007782222*/

voice translation-profile Outbound

translate called 10

dial-peer voice 10 pots

destination-pattern 9[2-8].......

direct-inward dial

port 1/0:23

translation-profile outgoing Outbound

forward digits 7

New Member

Re: Block Outgoing Calls SRST Mode

Good Day:

Did you manage to get call blocking with SRST ??

We are trying to do the same.

Silver

Re: Block Outgoing Calls SRST Mode

You can use these SRST commands to block calls.

after-hours block pattern

after-hours day

Please note that these commands are available only in SRST 3.1. You would need to run IOS release 12.3T

Bronze

Re: Block Outgoing Calls SRST Mode

You can achieve the same using COR ( class of restrication).This is similar to partions and calling search space in callmanager.

Thanks,

Radhika.

179
Views
0
Helpful
5
Replies
CreatePlease to create content