Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Blocking a incoming call

Can I block a specific phone number from calling into my system. i am running CCM 4.1(3)sr3a. If so how would I go about doing this. Thanks in advance.

2 REPLIES
Bronze

Re: Blocking a incoming call

Hi,

Please take a look at this post. This can be done if you are using a h323 gateway, but can't be done if using a MGCP gateway.

http://www.ciscotaccc.com/kaidara-advisor/voice/showcase?case=K18904845

Bronze

Re: Blocking a incoming call

Here is example of how to block incoming call based on ANI if using a H323 gateway. At the present time, it is not possible with a MGCP gatewawy.

http://www.cisco.com/en/US/customer/tech/tk652/tk90/technologies_configuration_example09186a00803f818a.shtml#con13

HTH,

Tony

132
Views
5
Helpful
2
Replies