Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Blocking inbound number on PRI (CCM 3.1(3a)

I would like to know if it is possible to block a (OUTSIDE) number from being routed to an internal ext.

Unity 3.0(4) call handler does answer most calls first, So would this be a CCM thing Unity thing or VG200/6608.

Thanks Rob

1 REPLY
Bronze

Re: Blocking inbound number on PRI (CCM 3.1(3a)

You cannot use a CCM for this you require a gateway for this . To configure incoming call blocking, define a translation rule with a reject keyword. For example

voice translation-rule 1

rule 1 reject /304156*/

Apply the rule to a translation profile for called, calling, or redirect-called numbers, such as

voice translation profile call_block_profile

translate calling 1

Include the translation profile within a dial peer definition. For example

dial-peer voice 111 pots

call-block translation-profile incoming call_block_profile

call-block disconnect-cause incoming invalid_number

In this example, the gateway blocks any incoming TDM (time-division multiplexing) call that

successfully matches inbound dial-peer 111 and has a calling number that starts with 304156. The

gateway also returns the disconnect cause "invalid number" to the source of the call. (Other

disconnect causes can be assigned i.e unassigned-number, user-busy, or call-rejected.)

191
Views
0
Helpful
1
Replies