Blocking incoming calls

adeolu_adeoye · ‎09-11-2002

Hi, I want to set up a route pattern to block a PSTN number from accessing my IP telephony network. I know how to set up route patterns in call manager but I suspect that this affects only outbound calls. I need to know what to do to handle inbound calls.

I heard that personal assistant can be used to do this sort of thing but I do not have it and the matter is rather urgent.

Any suggestion would be appreciated.

Regards,

Ade

rickb · ‎09-12-2002

I would handle it on the gateway. Try this on your dial-peer.

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122sup/122csum/csum3/122cvvf/vsf_a.htm#xtocid16

Rick

adeolu_adeoye · ‎09-13-2002

Hi Rick,

Thanks a lot for your suggestion. I tried putting in the command but it was not recognised. I curently run IOS 12.2 XN with MGCP dial peers. Or is this command available with only H323?

Regards,

Ade

rickb · ‎09-13-2002

May only be able to do it on h323. That command was implemented in IOS 11 code.

adeolu_adeoye · ‎09-14-2002

Thanks Rick,

I just upgraded the IOS to 12.2.11T and still could not get the command in. I guess it is just for H.323

Thanks for your help.

Regards,

Ade