Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

C2821-25UC/K9

Im using the Dynamic Configuration Tool.

Im configuring aditional three vic2-4fxo to the c2821-25uc/k9.

I dont know why the application show me a warning when a select the PVDM2-32U48=.

But if I select the PVDM2-48= instead PVDM2-32U48 everithing is ok.

What is the difference to use PVDM2-32U48= or PVDM2-48= with C2821-25UC/K9 with three vic2-4fxo cards.

Thanks.

3 REPLIES
Hall of Fame Super Red

Re: C2821-25UC/K9

Hi Rafael,

I have never seen the part # PVDM2-32U48= but you will be fine with the PVDM2-48= on a 2821 :)

http://www.cisco.com/en/US/prod/collateral/routers/ps5854/product_data_sheet0900aecd8016e845_ps3115_Products_Data_Sheet.html

Hope this helps!

Rob

New Member

Re: C2821-25UC/K9

PVDM2-32U48 is

PVDM2 32-channel to 48-channel FACTORY UPGRADE,

while the PVDM2-32U48 has a price list of USD 750, the price list for PVDM2-48= is USD 2400.

Hall of Fame Super Red

Re: C2821-25UC/K9

Hi Rafael,

I see :) In this case you would have to be puchasing a "bundled" package that included in it's price a PVDM2-32. For an extra $750 you could ask for the upgrade to a PVDM2-64. This sadly, cannot be ordered except in a "bundled" package :(

Here is an example;

Table 22 48-User Office - Single Site (Cisco 2821 Integrated Services Router)

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/bcs/testcase/reference/guide/whitebom.html

Hope this helps!

Rob

232
Views
0
Helpful
3
Replies