The department as seen by Attendant Console is just a list of people who have that particular string listed as their Department in LDAP. If you configure at least one person as belonging to a certain department in DC Directory or in your AD or Netscape integrated directory, it should be searchable in Attendant Console.
If you are using the CallManager built-in DC Directory, you can set any user's Department using the Global Directory function in CCMAdmin. If you are integrated with Active Directory, you need to set the Department attribute on the user using Active Directory Users & Computers. I'm not sure how it works with the Netscape LDAP directory, but you probably don't have that.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...