Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

Call forward to Unity Connection Fails

I have CUCM7.1 and UCXN 7.0 and have done sip integration.  When phones call their voicemail it works fine.  When a call to phone is forwarded to vm the main greeting is announced and not the personal greeting.  RTMT port monitoring indicates the correct caller and the called is the vm pilot.

Any suggestions?

Everyone's tags (2)
2 REPLIES

Re: Call forward to Unity Connection Fails

You may want to double check the configurations on your SIP trunk and SIP profile assigned to the SIP trunk.  Refer to this integration guide.  I used it and it works like a champ.

http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/integration/cucm_sip/guide/cucintcucmsip050.html#wp1094879

HTH.

Regards,
Bill

Please remember to rate helpful posts.

HTH -Bill (b) http://ucguerrilla.com (t) @ucguerrilla

Please remember to rate helpful responses and identify

New Member

Re: Call forward to Unity Connection Fails

I figured out what it was.  I forgot to check the Redirecting Diversion Header Delivery boxes on the trunk.

780
Views
5
Helpful
2
Replies
CreatePlease to create content