A user has call forwarded his POTS line to a VOIP 5 digit number. As long as he is at his VOIP number his number is forwarded. In the event he is not there, Unity vm does not function. The response is 'enter your ID number'. Does anyone have any idea why Vm does not function while forwarding calls?
So to review this was what was happening... If a PSTN or on net call dialed the POTS line forwarded to a VOIP DN, the voice mail wouldnt work. The reason is... on Unity using Call Viewer the dialed number isnt the VOIP DN but the POTS line. The person was forwarding the call using functions on the phone itself instead of having calls forwarded from the PBX. So the fix is to have the PBX send the forward instead of the phone. Then Unity will recognize the DN number and VM is triggered.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...