Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Call Manager 3.0 SMDI Integration with Octel 350 via VG248 gateway

What are the exact cable specifications and pin-outs required to inter-connect CCM to an Octel 350VM server using SMDI via the VG248 Analog Gateway.

The SMDI Integration link 'originates' from the Async port of the VG248 and 'terminates' at a DB25 male connector attaching to the Octel 350VM.

What are the Pin-Outs on both ends?

What are the Cisco part numbers (for cable) required?

  • Other Collaboration Voice and Video Subjects
1 REPLY

Re: Call Manager 3.0 SMDI Integration with Octel 350 via VG248 g

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.

115
Views
0
Helpful
1
Replies
This widget could not be displayed.