Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Call manager and unity

I have AT&T Merlin Legend with 96 extensions and want to implement cisco call manager with auto reply feature and voice mail with 8 VM ports. Hardware will be MCS 7835-1000 with Call Manager 3.1 and AutoAttendant,Cisco Unity 2.46, Cisco 2620/3640 with 30-channel ISDN card. Will any PABX be integreted with Call manager?? Can i have both unity and call manager on single MCS7875 server or i need 2 servers??<br><br>


Re: Call manager and unity

Looks like there are two questions here: 1)Will any PABX be integrated with Call manager?? and 2)Can i have both unity and call manager on single MCS7875 server or i need 2 servers??

The answer for the first question will need to come from the CallManager folks. This forum is just for Unity questions. As far as the second question goes, we do not currently offer support for a single box Unity/CallManager solution.

New Member

Re: Call manager and unity

What do you mean by "integrate"? You can connect a PBX to a Gateway that will then connect to CallManager, which will allow you to make calls between the two systems. The gateway can have many types of interfaces including FXS/FXO, T1/E1, BRI/PRI etc. On the IP side of the Gateway, you can use H.323, MGCP(limited to FXO/FXS currently) or Skinny.