call manager call connection timeout

[m.paolelli]

Hi all.

I've got a ROUTER 2651XM with an IOS Version 12.3(8)T3, and a Voice Card for 2 ISDN BRI.

The voice gateway is connected, at the other side, to a CallManager 3.3(3).

I'd like to terminate ANY CALLS after 15 minutes of conversation...

How and Where can I set this timeout?

Thanks

[Chris Deren]

There is no such setting on either CCM nor the GW.

Chris

[tnooning]

On the router, see if you can use 'timeout absolute 15' under either the BRI or dialer interface.

[m.paolelli]

Hi and thanks for the answer.

I've already tried (at the BRIs) the command 'timeout absolute', putting the value '1' (timeout absolute 1).

So, I was waiting for my call to be disconnected after one minute... but it happens only for the FIRST call which occurs after I gave the command on the router. The next calls does not to have the limitation and the duration is not of one minute.

D'you know why?

[tnooning]

Can you post your router config?

[m.paolelli]

Hi. My router configuration (I've cut off the 'timeout absolute 1' command for it didn't work... but the first time!) is in attach...

Thanks for any help.