Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

call manager call connection timeout

Hi all.

I've got a ROUTER 2651XM with an IOS Version 12.3(8)T3, and a Voice Card for 2 ISDN BRI.

The voice gateway is connected, at the other side, to a CallManager 3.3(3).

I'd like to terminate ANY CALLS after 15 minutes of conversation...

How and Where can I set this timeout?

Thanks

5 REPLIES
Hall of Fame Super Silver

Re: call manager call connection timeout

There is no such setting on either CCM nor the GW.

Chris

New Member

Re: call manager call connection timeout

On the router, see if you can use 'timeout absolute 15' under either the BRI or dialer interface.

New Member

Re: call manager call connection timeout

Hi and thanks for the answer.

I've already tried (at the BRIs) the command 'timeout absolute', putting the value '1' (timeout absolute 1).

So, I was waiting for my call to be disconnected after one minute... but it happens only for the FIRST call which occurs after I gave the command on the router. The next calls does not to have the limitation and the duration is not of one minute.

D'you know why?

New Member

Re: call manager call connection timeout

Can you post your router config?

New Member

Re: call manager call connection timeout

Hi. My router configuration (I've cut off the 'timeout absolute 1' command for it didn't work... but the first time!) is in attach...

Thanks for any help.

115
Views
0
Helpful
5
Replies
CreatePlease to create content