Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Call Manager talking to a H323 Client (Netmeeting) through a Gatekeeper

I was wondering if somebody has already activated a similar situation; I think yes so I would ask what could cause the problem of a h323 client which is not able to talk with an IP phone. Both CCM and the H323 client are correctly registered on the Gatekeeper but it seems that CCM doesn' recognize something. What am I forgetting ?

Thank and regards

Marco

5 REPLIES
New Member

Re: Call Manager talking to a H323 Client (Netmeeting) through a

Take a look at your codec you are using on your netmeeting client......what kind of IP phone are you calling?

Cisco Employee

Re: Call Manager talking to a H323 Client (Netmeeting) through a

On the gatekeeper configuration in CallManager, did you check the box to allow anonymous calls? That would be a requirement if you did not define the NetMeeting client as an H.323 Phone in CallManager.

Also check the codec as was suggested. Also, if you are using Partitions and Calling Search Spaces, check the Calling Search Space setting for the gatekeeper in the CCM Admin and make sure that it has the correct permission to call the desired IP phone.

New Member

Re: Call Manager talking to a H323 Client (Netmeeting) through a

I have already checked this box and I tried the g711 alaw codec to be sure that it's the same on the CCM side.

I'm not using Calling Search Space.

Thanks for the feedback however.

Marco

New Member

Re: Call Manager talking to a H323 Client (Netmeeting) through a

correct me if I`m wrong:

IP Phone can talk to Netmeeting but Netmeeting couldn`t place a call to IP Phone is it correct?

Petr

New Member

Re: Call Manager talking to a H323 Client (Netmeeting) through a

Strange to say but I solved this issue upgrading the gatekeeper software to 12.1(5)XM.

Hoping that this could help somebody else.

Marco

183
Views
0
Helpful
5
Replies