Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

call manager with asterix

hi we have call manager 4.1 , i have installed a asterixsip serevr with sip phones.

iam able to call from cisco to non cisco and visa versa.

but this only possible when i set the codec fo cisco phones as g.711.

it is not working when i change it to g.729.

what should i do please help

2 REPLIES
Green

Re: call manager with asterix

Hi,

CCM 4.1 SIP trunks only support G.711.

So you will need to have CCM 5.0 to integrate your Asterisk using other codec.

For CCM5.0

Table 41-3 Supported Audio Media Types

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a008037e317.html#wp1126527

For CCM 4.X

SIP trunks provide connectivity to other SIP devices such as gateways, proxies, voicemail systems, and other Cisco CallManager clusters. SIP trunks have the following characteristics that differ from H.323 trunks:

•G.711 A-law and mu-law codec support

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_implementation_design_guide_chapter09186a008044751e.html#wp1045508

//G

Re: call manager with asterix

In order to support G.729 on Asterisk, you need to purchase G.729 license ( 10$) from Digium. Take a look into asterisk log files , it should give you error messgae, like no codec match or something like that. Let me know if it helped to solve the prob.

210
Views
5
Helpful
2
Replies
CreatePlease login to create content