Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Call outbound with pstn

who configure this procedure in my routers, and what ios version is necessary?

Best,

2 REPLIES
Silver

Re: Call outbound with pstn

Cisco IOS MGCP gateways support different device protocols for interfacing to the PSTN or other non-IP devices, depending on the gateway model and the type of installed network modules and voice interface cards (VICs). A subsequent web pane provides configuration for these interfaces. Check this out:

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/3_1/sys_ad/adm_sys/ccmcfg/b06gtway.htm

New Member

Re: Call outbound with pstn

My configuration is 03 sites, 02 remotes sites in same state and 01 remote site in other state.

02 sites have VIC E&M and 01 site FXS.

This configuration don´t have call manager and need outbound calls for PSTN in each site.

Best.

82
Views
0
Helpful
2
Replies