(I have tried on both pub and sub servers same thing)
For internal and external call is parked OK 640 displayed as parked number, go to another phone in same office/partition off hook dial 640 goes fast busy. Call will return to parked phone I can continue to park the call showing same 640 but I can't pick it up from another phone
I know this used to work, it has been awhile since I have used it and this was brought to my attention yesterday.
I have removed the replaced all call park configurations. used different partitions, reset gateways/phones and rebooted
NO errors at all in event logs....
The only thing that has been changed/added to the cluster is OSUPGRADE 2000.2.5 and 2000.2.5sr4 on 11/14/2003
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...