We are also running 4.1(3) and are seeing issues with call pickup failing intermittently. We have just two pickup groups. Sometimes toggling the system parameter associated with automatically answering the call following a pickup will allow group pickup to work. Otherwise, the pickup group needs to be deleted and recreated.
There are a couple of bugs which suggest some issues with group pickup and hunt groups, but I can't find anything which suggests a problem with basic pickup groups.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...