Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Call Pickup not Working

I have just read that call pickup does not work on call manager 4.0 Can anyone help with the revision required to allow this function to work properly

5 REPLIES

Re: Call Pickup not Working

The call pickup feature is available in CCM 4.0. Please see the link below for the required configuration.

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a0080094380.shtml

Hope this helps. If so, please rate the post.

Brandon

New Member

Re: Call Pickup not Working

Thanks for your input, but at the top of the page of your link it mentions the bug issue that I am concerned about

Re: Call Pickup not Working

Take a look at the following link. The "problem" only occurs if the DN is a member of a line group. As the link explains, this is actually the expected behavior. If you need a DN that is a member of a line group to also be a member of a pickup group, you can open a Product Enhancement Request (PER).

http://www.ciscotaccc.com/voice/showcase?case=K11612191

Hope this helps. If so, please rate the post.

Brandon

New Member

Re: Call Pickup not Working

The phones are not members of a line group.

Re: Call Pickup not Working

Then you should have no problem with the pickup feature in CCM 4.X

Brandon

311
Views
0
Helpful
5
Replies
CreatePlease login to create content