05-09-2003 12:21 PM - edited 03-12-2019 11:49 PM
What´s problem this call? They see:
.May 9 17:08:49.979: Sending Complete
.May 9 17:08:49.979: Bearer Capability i = 0x8090A3
.May 9 17:08:49.979: Channel ID i = 0xA98384
.May 9 17:08:49.979: Called Party Number i = 0x80, '1300', Unknown/Unkn
own
.May 9 17:08:50.015: ISDN Se1/0:15: RX <- CALL_PROC pd = 8 callref = 0x8761
.May 9 17:08:50.015: Channel ID i = 0xA18384
.May 9 17:08:50.023: ISDN Se1/0:15: RX <- ALERTING pd = 8 callref = 0x8761
.May 9 17:08:50.023: Channel ID i = 0xA18384
.May 9 17:08:50.023: Locking Shift to Codeset 5
.May 9 17:08:50.023: Codeset 5 IE 0x32 i = 0x80
.May 9 17:09:10.087: ISDN Se1/0:15: TX -> DISCONNECT pd = 8 callref = 0x0761
.May 9 17:09:10.087: Cause i = 0x8095 - Call rejected
.May 9 17:09:10.107: ISDN Se1/0:15: RX <- RELEASE pd = 8 callref = 0x8761
.May 9 17:09:10.111: Cause i = 0x809080 - Normal call clearing
.May 9 17:09:10.115: ISDN Se1/0:15: TX -> RELEASE_COMP pd = 8 callref = 0x076
1
Solved! Go to Solution.
05-12-2003 10:03 AM
THe ISDN switch is rejecting the call but it does not say on what parameter. In my experience it could be they are expecting an ani for the call and they are not getting it.
05-12-2003 10:03 AM
THe ISDN switch is rejecting the call but it does not say on what parameter. In my experience it could be they are expecting an ani for the call and they are not getting it.
05-12-2003 11:28 AM
Exist a way in the router to interpreter this ANI or command relative to a tecnology ISDN?
05-18-2003 06:54 PM
What model gateway are you using? Is it CAT OS or IOS?
05-21-2003 05:34 AM
I´m using IOS for solutions.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide