Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

call routing base on changing param in H323 router

Hi, I need to build a solution using an existing 2811 h323 voice router, to route call diffently each hour.

An internal system can update someting on the router (a param or a file) and the router has to read that information and then route the call base on that info. Do you have any conf example for me ? a tcl ?

1am: DID = 514-555-1212 -> reroute = 613-342-2323

2am: DID = 514-555-1212 -> reroute = 819-331-2623

3am: DID = 514-555-1212 -> reroute = 456-144-1323

2 REPLIES
New Member

Re: call routing base on changing param in H323 router

There are sample TCL scripts that will do time of day routing.

Download from http://www.cisco.com/cgi-bin/dev_support/access_level/product_support

You can download a ZIP file with the TCL script and a document explaining how to implement this on your gateway.

This script adds a prefix to a called number based on ToD rules, so you may need to add in some translation patterns to acheive your desired result.

New Member

Re: call routing base on changing param in H323 router

Humm, I'm looking for a tcl script that can read a txt file (located on the router flash). That file will contain the info about where transfer the call..

i.e. 533-555-1212 => 123-123-1234

533-555-1213 => 332-134-3434

533-555-1214 => 132-366-9999

That file will be loaded on the router each hour (worst case screnario)

Thanks !

124
Views
0
Helpful
2
Replies