Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Call Routing based on calling ID

Is it possible to have call routing based on the incoming caller ID instead of the dialed number in the following senecarios:

(1) Calls from PSTN to CallManager 3.3

(2) Calls from PSTN to CME system 3.1

Thanks,

JJ

2 REPLIES
Bronze

Re: Call Routing based on calling ID

if h323, just use a dial-peer to point to appropriate CM

If mgcp, just use a TP to go from CM to CME

Community Member

Re: Call Routing based on calling ID

Yes.

From pstn to extension direction we use a tcl script at the voice gateway.

You should use different partitions for this from extension to pstn/extension direction.

149
Views
0
Helpful
2
Replies
CreatePlease to create content