I have configured the cisoc call back featire and it works fine with the normal IP phone.
I am trying with a device profile: When I call a device profile number 2441. "Call forwading no answer" and "call forward busy" has been configured for the device profile to number 1441. THen I mage 1441 busy and the user hs not been logged in anywhare. Usually call will forwarded to 1441 ( which is busy now). But I get callback error "TextCFWNOANS" error message.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...